New and improved for 2019 1/10th titanium B3 style kingpins. These are .060" longer than the standard B3 kingpins.
New and improved for 2019 1/10th titanium B3 style kingpins. These are .060" longer than the standard B3 kingpins.
Ovalwerks
Titanium Shock Shaft for HPI/Tamiya Center Shocks. Shaft is 3mm X 36mm
Ovalwerks
Rubber tire Front end by Ovalwerks. Geometry designed for CRC rubber tires with 5 degrees of caster built into the lower arms. This will stabilize the car and allow a more aggressive...
Ovalwerks
Titianium front axles for Associated 10L front spindles. These are 3.2 grams per pair and have the same dimensions as the GFRP, HD front axles. Precision swiss made Lower your...
Ovalwerks
New and improved for 2019 1/10th titanium B3 style kingpins. These are .020" longer than the standard B3 kingpins.
Quasi Speed
16mm long Titanium Turnbuckle used In the Front ends of the Octane Lineup
Ovalwerks
New and improved for 2019 1/10th titanium B3 style kingpins. These are .020" longer than the standard B3 kingpins.
Ovalwerks
Titianium front axles for Associated 10L front spindles. These are 3.2 grams per pair and have the same dimensions as the GFRP, HD front axles. Precision swiss made Lower your...
Ovalwerks
Machined delrin spindles with carbon fiber steering arms. Options for Rubber tire steering arms and foam tire arms.
Ovalwerks
Rear body mounts for EDGE Chassis. Thes rear body mounts have an open bottom design for easy body adjustment.
Ovalwerks
Lightweight front bumper for all HBS chassis. All 2017 and new use 4-40 mounting and are mostly the matte finish.
Ovalwerks
One piece machined delrin servo horn with short and long tie rod holes. This servo horn is lighter then a standard servo horn and provides a better fit for more precision front end. This horn is...
Ovalwerks
Machined delrin spindles for use with carbon fiber steering arms.
Rebuild kit that includes 2 O-rings. 2 Foams, and 2 laser cut Delrin star clips.
Ovalwerks
Servo mounting Kit for the updated 2023 Octane chassis.
Ovalwerks
Rubber tire Front end by Ovalwerks. Geometry designed for CRC rubber tires with 5 degrees of caster built into the lower arms. This will stabilize the car and allow a more aggressive...